Dial Indicator

• .060" / 1.5mm
• 1.0" / 25.4mm
• .150" / 3.8mm
• 2.0" / 50.8mm
• .250" / 6.35mm
• 4.0" / 101.6mm
• .600' / 15mm

• Travel reverse
  Reverses the direction of the reading (+/-) in relationship to spindle movement.
• Auto off
  Turns gauge off after 10 minutes of inactivity. When Auto Off is enabled, an hour glass figure appears at the left side of the display.
• Floating Zero
  Allows the setting of ZERO at any position of the spindle.
• Rotating bezel
  Allows the user to position the gage display at any angle, throughout 270 degrees, for convenient viewing.
• Large direct drive LCD display
  Character height .305".

• .00005" / .001mm
• .0001" / .002mm
• .00025" / .005mm
• .0005" / .01mm
• .001" / .02mm
• User selectable resolution
  Other gage resolutions can be selected by the user, provided the resolution is coarser than the resolution of the gauge originally purchased.
• 2 SPC data output formats
  RS 232: For direct interfacing to computers and serial printers
  MTI: Interface directly to MTI data collectors and/or printers
• Measuring system of either English or Metric
  This minimizes measuring conversion errors, since you can choose either an inch or metric system.
• Maximum reading hold
  Displays and holds the highest reading. Actual spindle position is retained.
• 3 power sources
  Replaceable 3V Lithium CR2450 Batteries
  A/C Adapter (110V or 220V 50/60 Hz. External)
  Through the Data Port (Regulated 5VDC)
• AGD group 2 size for up to .600" travel
• AGD group 3 size for up to 1.0" travel
• Internal and external serial numbers