Company Profile

ATS Pneumatic Chain Saw
The unique registered design of the ATS Chain Saw allows for automatic precision levelling and aligning of the timber in relation to the frame via a clamp down mechanism. This safety clamp down mechanism, also acts as a lock to hold the saw up in the open position while loading.

ATS Pneumatic THM Hoists Lifting & Pulling Excellence
2 Ton, 3 Ton, 5 Ton, 6 Ton & 10 Ton. Extremely hard wearing rust free stainless steel cylinder with 5 valves for high speed results in outstanding performance with load pulling & speed in both directions.

ATS Pneumatic Roof Bolt Tensioner
Unique patented design extends motor housing, putting it closer to the tightening point, eliminating large power losses which occur in long extended sockets. This light weight design allows for one operator to work with ease and simplicity.

ATS Pneumatic Turbo "G" 4 Single Blade Rock Sampling Tool
Grinding and Cutting Excellence with adjustable flow water feed and 50% enclosed guard and an aoutstanding uncluttered side to centre of only 46mm which can produce a cut of 65mm depth, and is the ideal tool for accurate and quick sampling and masonry cutting.

ATS Pneumatic Vortex Submersible Sump Pump
ATS Pneumatic Vortex Submersible Sump Pump has been specifically developed to operate under severe mining conditions, which require tough, durable, easy to operate, with the lowest possible weight, noise and air consumption, resulting in a combination of versatile features and benefits never seen before.

ATS Pneumatic Turbo "G" 4 Mk2 Vertical & Horizontal Grinders, Sanders & Polishers
The Turbo G 4 bursts into life the second you switch on the safety lock throttle and runs to the maximum safe permissible speed of the wheel. When the slightest load is applied the speed controller senses this and responds by increasing airflow with only a 3% reduction in speed under full load.

Hydraulic Earth Auger TI 30
Hydraulic earth auger can drill holes with diameters up to cm 30.
TI 30 can be also be used for the mechanical rotation of the hub of big water valves.

Hydraulic Hammer Drill HD 12
Hydraulic hammer drill for concrete and masonry weigth KG 12, can be used either as a drill for holes up to mm 50 and also has a small chipping hammer for light demolition works.

SP 45 Submersible Water Pump
Submersible trash pump with hydraulic motor, ideal in all pumping works of thick liquids, can pump suspended solids with maximum dimension of mm 70.

Oasis Trading offer the following products

• Air / Pneumatic Tools: Angle Grinders
• Air / Pneumatic Tools: Cutting Tools
• Air / Pneumatic Tools: Motors
• Air / Pneumatic Tools: Sanders
• Air Angle Grinder
• Air Hoist
• Air Hoists for Mining Industry
• Air Tools : Angle Grinders
• Air Vertical Grinder
• Chainsaws
• Chainsaws : Electric Chain Saw
• Chainsaws : Steel Chain Saw
• Cutters : Pneumatic Utility Cutter
• Cutters : Rock Sampling Cutter
• Cutters : Utility Bolt Cutter
• Electric Submersible Pump
• Electrical Submersible Pump
• Grinders : Pneumatic Grinder
• Grinders : Pneumatic Horizontal Grinder
• Grinders : Pneumatic Vertical Grinder
• Hoists : Industrial Air Hoists
• Hoists : Pneumatic Hoist
• Hoists : Pneumatic Lifting Hoist
• Horizontal Grinder
• Hydraulic Submersible Pumps
• Jackhammers
• Jackhammers : Electric Jackhammer
• Multi Stage Submersible Pumps
• Pneumatic Roof Bolt Tensioner
• Rock Drills
• Rock Sampling Tool
• Sanders : Pneumatic Horizontal Sander
• Sanders : Pneumatic Sander
• Sanders : Pneumatic Vertical Sander
• Self Priming Centrifugal Pumps
• Single Stage Submersible Pumps
• Submersible Pumps
• Submersible Sand Pump
• Submersible Sewage Pump
• Submersible Slurry Pumps
• Submersible Sump Pump
• Submersible Utility Pump
• Submersible Wastewater Pump
• Submersible Water Pump
• Sump Pumps

(If this profile looks odd, please let us know.)