Aluminium Profiling, Conveyor Components and Accessories

• Modular system;
• Quick assembly;
• No drilling required;
• No treatment or painting required;
• Parts are re-usable reducing the cost of modifications, additions and change;
• Off-the-shelf purchases;
• Short delivery time;
• Economically priced;
• Locally manufactured; and
• Ultimately reducing project turnaround times and costs.

• The airveyor has been designed to convey unstable empty bottles with the same neck diameter.
• These bottles are transported with high speeds with the use of air from one point to another (e.g. the injection blow moulding machines to the rinser of filler).
• Side and corner profiles make up the airveyor section with the bottom panel acting as a louver section for channelling air thrust.

• Slow moving conveyors.
• Temperatures higher than 100°C or lower than -10°C.
• Typically used beneath the blow moulding machine for the conveyoring of top and tails.
• Machine tuners standing on the top of the belt to perform settings.

• For linear or rotary movement.
• Easy machining of profiles to use different shaft sizes.

• These aluminium profiles are general used to manufacture conveyor assemblies.
• Conveyors are used for the transport of goods between two applications and/or machines.
• Conveyor side plates are available in 82.5mm, 114mm and custom sized mattop conveyors.
• A wide range of conveyor spares is available.

• To stow away unsightly electric wiring, cabling, pneumatic piping, telephone cords, control wiring etc.
• The slide/clip-on lid makes it easy to use. The screw-on end cap is used to neatly close off unsightly cabling.

• General engineering and structures. Profiles’ walls are thicker to carry more weight.

• These profiles can be used for numerous structures, frames, general construction and engineering.
• The TB4-M00-00, TB5-M00-00 and TB9-M00-00 were designed to telescopically fit into each other for easy height adjustments.
• Custom brackets are available for every profile size and it is fastened with cap screw, washers and square nuts – no drilling required

• General light construction e.g. conveyor guide rails, panels, frames etc.

• All these profiles are used to manufacture Pro-Vey parts.
• Non of these profiles are anodised.

• The rubbers are extruded from silicon.
• It is used for wedge conveyors to elevate bottles between different levels.