Browsing from:

Abeco Tanks (Pty) Ltd

Support Towers

Support Towers

Hot dip galvanized is recommended for optimum cost effectiveness.

Standard Accessories:
  • Caged external access ladder
  • Internal access ladder
  • Hinged lockable manhole
  • Float and pointer type water level indicator
  • Screened ventilator
  • Other accessories that can be supplied on request are: Valve boxes fixed to roof sheets to accommodate inlet float shut valves. Sump boxes welded into tank floor plates.
Pipe Connection Points:

Pipe connection points are positioned at points selected by the purchaser. Manufacture does not start until this information is supplied. Designers should take care in selecting pipe connection points to ensure that piping will not foul tank supports or internal members.

Standard fittings:
  • BSP sockets
  • Flanges to BS 4504 10 bar or SABS 1123 1000 kPa welded to stub pipes.
  • Inlet connection flanged inside and outside, otherwise flanged outside only.
Applied Loads:

Live Load - Force due to water mass.
Dead Load - Force due to empty tank & tower mass.
Wind Load - Force due to wind pressure.
Surge Load - Force due to water surging as Tower sways under wind load.

Imposed Loads:

Shear - To be resisted by foundation bolts.
Uplift - To be resisted by foundation bolts - Mass of concrete foundation & back fill material - Must anchor the structure to prevent overturning.
Down Thrust - To be resisted by soil bearing pressure.

Click here for more Product Details from Abeco Tanks (Pty) Ltd...

Platinum500
This company does not offer products/services to the United States of America.
Login to send Inquiry
A user with the specified email address already exists. Please login with your password to proceed.
Email (Username)  
 
Password  
 
Remember me
 
  Forgot your password?