Browsing from:

Despatch LCC/LCD Laboratory Oven

Despatch LCC/LCD Laboratory Oven

Despatch’s LCC and LCD Clean Process Benchtop Ovens have a stainless steel interior and exterior, rugged, programmable process controls and provide a variety of tailored options for your specific needs.

Despatch Oven Models

Model Capacity Oven Type Max temp Temp Uniformity
LCC1-16 1.6 cu ft Cleanroom/lab 500°F (260°C) ± 3°C at 260°C
LCC1-51 5.1 cu ft Cleanroom/lab 500°F (260°C) ± 3°C at 260°C
LCD1-16 1.6 cu ft Cleanroom/lab 662°F (350°C) ± 3°C at 260°C
LCD1-51 5.1 cu ft Cleanroom/lab 662°F (350°C) ± 3°C at 260°C
LCC2-14 14 cu ft Clean/Cabinet 500°F (260°C) ± 3°C at 260°C
LCD2-14 15 cu ft Clean/Cabinet 662°F (350°C) ± 3°C at 260°C

For production environment processes where minimal contamination is essential, the LCC and LCD Series benchtop ovens offer the highest standards in HEPA filtration. Re-circulated airflow is 100% HEPA filtered for operation at ISO Class 5 (Class 100) or better within the oven chamber. Also available in a non-HEPA filter option.

Typical applications for these ovens include die-bond curing and other semiconductor packaging processes, depyrogenation, sterilizing and drying for life sciences. The ovens are configured for 220/240 volts and 50/60 Hz. These units are stackable to save valuable floor space and provide maximum ergonomic efficiency for operators. The recirculation motor is mounted at the rear of the oven, providing convenient access and allowing up to three ovens to be stacked on top of one another, while still keeping loading heights ergonomically acceptable.

It is available in two different atmosphere configurations:

Air Atmosphere

A forced exhaust fan is included on the air temperature unit for rapid cooling.

Inert Atmosphere

Allows nitrogen (or other inert gas) to be injected into the chamber to lower the oxygen level to prevent oxidation of products. A water cooling coil is provided for rapid cooling. Control of nitrogen flow and water cooling is programmable through the Protocol 3™ controller.

Larger Sizes Available

LCC/LCD2-14 Clean Process Ovens meet the demands of production and large scale R&D efforts.

p>Standard Features

  • LCD: 350°C (662°F) maximum temperature
  • LCC: 260°C (500°F) maximum temperature
  • Lockable Disconnect Switch on the control panel for easy servicing
  • Protocol 3™ control with large LCD display, integrated data logging capabilities and USB port for simple oven set-up and data export
  • Stainless steel interior with all interior seams continuously welded on the insulation side to protect the work chamber from contamination
  • Programmable door lock prevents operators from opening oven door when cycle is in process
  • Door Interlock switch turns off heater when door is open
  • Recirculated airflow is 100% HEPA (High Efficiency Particulate Air) filtered for ISO Class 5 (Class 100) operation throughout the process cycle
  • Magnehelic™ gauge monitors the HEPA filter pressure drop so you know when it is time to replace the filter
  • Electric door release for ergonomic operation
  • UL & C-UL Listed open control panel
  • Modbus communications connection (RS485) for remote monitoring and recording
  • End of cycle and high limit audible and visual alarm, that can be seen and heard from a distance

Options

  • Silicone-free construction
  • Non-HEPA filtration model
  • Fast rate HEPA filter
  • Door interlock switch turns off heater and fan when door is opened
  • Cleaning and triple bagging in clean room prior to shipment
  • Chart recorders
  • Three color process stack light
  • Skirted stands with leveling legs
  • Extra shelves
  • Oxygen concentration monitor system
  • Data acquisition Protocol Manager software
  • Nitrogen atmosphere
  • 280 volt service
  • CE compliance

Click here for more Product Details from Despatch...

Gold
Login to send Inquiry
A user with the specified email address already exists. Please login with your password to proceed.
Email (Username)  
 
Password  
 
Remember me
 
  Forgot your password?



Click Here if you want to attach a document ...