Communications and Specialty Modules

GE Fanuc Series 90-30 Communications and Specialty Modules

Communication and Specialty Modules – These type modules give versatility to the 90-30 PLC system, allowing it to go beyond generic functionality. Communication Modules allow the system to control advanced functions, such as networking, temperature control, high speed counting, motion control, and even interfacing with machine operators. Other Specialty Modules include Programmable Coprocessor, allowing interfacing with bar code readers, RTUs and other ASCII devices through MegaBasic or “C” programming; Servo Motion Control Modules come in the DSM Module that is 2 axis high performance digital including servos and amplifiers, and the APM Module available in one or two axis analog. Still others Modules available include Multi-Axis Stepper; Absolute Resolvers/Encoders; Thermocouple; RTD; Millivolt/Strain Gauge; Sequence of Event Recorder; and Modem Modules. The following table represents a sampling of the 100s of Communication and Specialty Modules available.

PART NUMBER	DESCRIPTION
IC693CMM301	GENIUS COMMUNICATIONS MODULE, GCM – 256 BITS
IC693CMM302	GENIUS COMMUNICATIONS MODULE, GCM+ - 1 KILOBYTE
IC693CMM311	COMMUNICATIONS MODULE, CCM, RTU, SNP, SNPX
IC693CMM321	ETHERNET INTERFACE MODULE
HE693RTUXXX	VARIOUS RTU/MODBUS MODULES (HORNER ELECTRIC)
IC693ACC300	INPUT SIMULATOR MODULE
IC693APU300	HIGH SPEED COUNTER
IC693APU301	AXIS POSITIONING MODULE, 1 AXIS, ANALOG
IC693APU302	AXIS POSITIONING MODULE, 2 AXIS, ANALOG
IC693DSM302	DIGITAL SERVO MODULE, 2 AXIS
HE693STPXXX	VARIOUS STEPPED POSITIONING MODULES (HORNER ELECTRIC)
IC693APU305	I/O PROCESSOR MODULE – READS PARALLEL GRAY CODE ENCODER
IC693PCM300	PROGRAMMABLE COPROCESSOR MODULE, 160KB, 35KB BASIC PROGRAM, 2 PORTS
IC693PCM301	PROGRAMMABLE COPROCESSOR MODULE, 192KB, 47KB BASIC PROGRAM, 2 PORTS
IC693PCM311	PROGRAMMABLE COPROCESSOR MODULE, 640KB, 190KB BASIC PROGRAM, 2 PORTS
HE693PCCXXX	VARIOUS PC COPROCESSORS (HORNER ELECTRIC)
IC693TCM302	TEMPERATURE CONTROL MODULE, AUTO TUNING, 8 THERMOCOUPLE IN, 8 24 VDC OUT
CS693ATM300	PID AUTO TUNING MODULE (CONTROLS0FT)
DL693MDMXXX	VARIOUS MODEM MODULES (DATALINC)
IC693BEM331	GENIUS BUS CONTROLLER MODULE
IC693BEM340	WORLDFIP BUS MODULE, MASTER
IC693BEM330	WORLDFIP BUS MODULE, SLAVE
HE693DNT250	DEVICENET INTERFACE MODULE, MASTER (HORNER ELECTRIC)
HE693IBS100	INTERBUS-S INTERFACE MODULE, SLAVE ONLY (HORNER ELECTRIC)
HE693BEM310	SDS INTERFACE MODULE, MASTER (HORNER ELECTRIC)
HE693PBM100	PROFIBUS-DP INTERFACE MODULE, MASTER (HORNER ELECTRIC)
HE693PBS105	PROFIBUS-DP INTERFACE MODULE, SLAVE (HORNER ELECTRIC)
PE693BEM350	I/OPEN LONWORKS BUS INTERFACE MODULE, MASTER, FTT-10 (PENSAR CORP)
PE693BEM351	I/OPEN LONWORKS BUS INTERFACE MODULE, MASTER, TPXF-78 (PENSAR CORP)
PE693BEM352	I/OPEN BUS INTERFACE MODULE, MASTER, TPXF-1250 (PENSAR CORP)
TM693SWP151	SEQUENCE OF EVENTS SOFTWARE, 256 INPUTS, 1MS RESOLUTION (TRIMATION)
TM693SWP152	SEQUENCE OF EVENTS SOFTWARE, 256 INPUTS, 10MS RESOLUTION (TRIMATION)
TM693SWP202	HOT STANDBY USING GENIUS BUS, 480 INPUTS, 512 OUTPUTS, 7,999 SYNCHRONIZED VARIABLES, REQUIRES CPU 340 (TRIMATION)
TM693SWP203	HOT STANDBY USING GENIUS BUS, 2048 I/O, 8,000 SYNCHRONIZED VARIABLES, REQUIRES CPU 351 OR CPU 352 (TRIMATION)

PLC Parts

Supplier of PLC Parts for:

GE Fanuc
Allen-Bradley