EngNet » Product & Service News

The FS2000L is a highly versatile general-purpose flow switch designed for the control of liquids, specialty gases or air in a wide range of industries. It is available with an electropolish finish of 20 Ra or 10 Ra for service in line sizes from 13 to 51 mm in high purity and sanitary environments. Read More

Hi-Therm – the Burner Makers – manufactures gas burner suitable for LPG and natural gas. The burners are fully automatic in operation and are available in On/Off and Hi/Lo/On/Off model depending upon the requirement. The capacity range starts from 10,000 kcal/hr to 5 lakh kcal/hr.  Read More

Hi-Therm Boiler Engineers had developed an automatic flame controller high/low which comprises of a fuel control valve and an air butterfly valve formed as a combination system operating through linkages driven by a servo motor under the command of a temperature controller to inch up/down the flame. Read More

Hi-Therm manufactures HIT Series pressure jet oil burners in the range of 10 to 600 LPH suitable for both light and heavy oils. Ideally used on steam boilers, hot air/water generators, hot mix plant, process heaters, etc, these are available in two models: On/Off and Hi/Lo/On/Off operation. Read More

Hi-Therm Boiler Engineers has developed a mini gas boiler, a first in India, which generates steam instantly with capacity of 30 kg/hr. MINI is fully automatic in operation and does not need any operator.  Read More

Furnace oil being viscous, the flow is poor which makes its compulsory to preheat it up to the atomising temperature so as to achieve optimum combustion. Furnace oil heating-pumping-filtering unit or HPFU is available in the range of 1- 60 kW. Read More

With their intelligent microprocessor-based design and no-moving part thermal mass flow sensors that deliver high accuracy gas flow measurement, the precision GF90 Insertion and GF92 Inline Mass Flow Meters from Fluid Components International have now received ATEX approval for use in potentially explosive environments classified as EExd IIC T4. Read More

Oil/gas process engineers seeking a reliable solution to measure the flow of combustible hydrocarbon waste gases for flare gas system disposal on offshore production platforms will find the GF90 Flare Gas Flow Meter from Fluid Components International precisely measures gases of varying compositions.  Read More

Midwest Motion Products of Watertown, Minnesota, is pleased to announce the release of a new DC Gear Motor, the Model No. MMP-TM55-24V GP52-079. Accepting any 24 Volt DC source, including battery power, this robust Gear Motor measures just 2.14” in Diameter, by 7.7” long, and has a keyed output shaft of 12mm diameter by 25mm long. Read More

Process engineers looking for a rugged instrument to measure complex stack gas flows precisely in accordance with clean air regulatory requirements will find the intelligent MT91 Multi-Point Mass Flow Meter from Fluid Components International is available with a tough chromium-carbide coating that protects it from abrasive and hot particulates... Read More

Polymer System AC85, a highly conductive silver filled adhesive and sealant. Owing to its highly conductive, non-oxidizing, silver particles AC85 has excellent conductivity. It also features long term durability even when exposed to adverse environmental conditions due to its oxidation and chemically resistant properties.  Read More