Contact Details

Tel:	+44 (0121) 359 5401
Email:	Email this company
WWW:	www.ejbowman.co.uk

Exhaust Gas Heat Exchangers

Bowman Exhaust Gas Heat Exchangers are designed to remove heat from the exhaust gas of engines and transfer it to the water circuit. Bowman Exhaust heat exchangers therefore enable waste heat recovery and can be used on cogeneration/combined heat and power (CHP) equipment up to 700 kw. The heat exchangers have stainless steel tubes, tube plates and shell and cast iron end covers. They should be installed horizontally with the water connections on top so that they are always full of water. It is important that any thermostatic valves are arranged so that there is always a flow of water through the heat exchanger, even on starting when the engine is cold. Automatic engine shutdown equipment should be provided with temperature probes in the exhaust gas heat exchanger and the engine. The heat exchanger should be installed below the level of the cylinder head, so that in the unlikely event of a tube leak occuring, water will not leak back into the engine.


	Product News \| Services \| Website Design \| Tips & Tools \| News \| Jobs \| Company Login \| Add Your Company \| About EngNet

Bowman E J (Birmingham) Ltd

Exhaust Gas Heat Exchangers